Etrad
The Etrad was first made from EPP foam, however it can be made sucessfully from EPS foam.
The plans listed should give you all the details required to produce the model. I do recommend that you use a timber dowel as a leading edge, if building from EPS, and also install the coreflute backbone for strength.
The model makes a cheap trainer and is a lot of fun to use as a combat machine.
Video of test flight shown at:
http://www.youtube.com/watch?v=ZxDSAwKSCCY
Here are the excellent plans for this model.
| File 1 | File 3 |
| File 2 | File 4 |
| < Prev |
|---|
